SMC-5-5-N-N

Novusun cnc controller
nvum/nvem/nvcm/nvmpg/nvec/SMC4-4-16A16B
Post Reply
lollette
Site Admin
Posts: 70
Joined: Wed Jun 06, 2018 8:34 am

SMC-5-5-N-N

Post by lollette » Tue Nov 19, 2019 2:28 am

Hello,
I am retrofitting a Lathe. I was wondering if the SMC-5-5-N-N Controller
will work OK on a Lathe using X and Z axis. Will you be able to program
in Diameter on X? Or is it a Radial value on X?
For example if I were to generate a .100" Radius on the front of a .500"
diameter Shaft, which program below will work below?

Example of Diameter X Value
G18
G0X.300Z.05
G1Z0F.005
G3X.500Z-.100R.100
G1Z-.5

OR

Example of Radial X Value
G18
G0X.150Z.05
G1Z0F.005
G3X.250Z-.100R.100
G1Z-.5

That is all that I need to know.

lollette
Site Admin
Posts: 70
Joined: Wed Jun 06, 2018 8:34 am

Re: SMC-5-5-N-N

Post by lollette » Tue Nov 19, 2019 2:32 am

QQ20191118-095144.png
QQ20191118-095144.png (158.99 KiB) Viewed 216 times
see manual https://www.lollette.com/support/pdf/CN ... nc1508.pdf

Post Reply