Firmware for SMC5-5-N-N

Novusun cnc controller
nvum/nvem/nvcm/nvmpg/nvec/SMC4-4-16A16B
Post Reply
lollette
Site Admin
Posts: 70
Joined: Wed Jun 06, 2018 8:34 am

Firmware for SMC5-5-N-N

Post by lollette » Sat Aug 31, 2019 12:29 am

I have some questions :

1. Can I configure more than 6 tools in tool table 15 for example?
2. How can I set the deceleration for each axis for individual?
3. What does means "Step Time" in Motor Confifuration tab 3 is difault, but what does it controls?
4. How can I configure feed rate control by external encoder?
5. Can you send me the Edit SYS Code?

lollette
Site Admin
Posts: 70
Joined: Wed Jun 06, 2018 8:34 am

Re: Firmware for SMC5-5-N-N

Post by lollette » Sat Aug 31, 2019 12:29 am

1, do not understand the meaning.
2, the acceleration value in the motor setting indicates acceleration and deceleration
3, step time refers to the pulse width
4, does not support
5,don’t have

Post Reply